Prelude integrated amps
PI-1
2 x 50 Watt
|
This new integrated amplifier is a
new contruction, with focus on
modern
production in combination with the highest performance. A lot of effort has been put into developing a system that is high-end, but also within a pricerange acceptable to most people. The PIA-1 has 2 sets of balanced inputs and 2 sets of RCA inputs, and has an output power of 2x50 watt in 8 ohms load. It is, like the rest of our amplifiers, stable down to 0.5 ohm. |
| Technical Data | Conditions | EBI-1 |
| Input impedance | Balanced input | 47Kohm |
| Output impedance | 0.03 ohm | |
| Noise floor | 20 - 20 kHz | < - 100 dB |
| Frequency response | - 3 dB | 1 - 200 kHz |
| Channel separation | > 120 dB | |
| THD + N | 20 - 20 kHz | < 0.006% |
| Maximum peak current | > 50A | |
| Damping factor | 8 ohm load | >250 |
| Rated output power | THD = 0.2% | |
| into 8 ohm | 2 x 50 W | |
| into 4 ohm | 2 x 75 W | |
| into 2 ohm | 2 x 100 W | |
| Dimensions | W x D x H | 420 x 340 x 77 mm |
| Weight | 6 kg | |
| Power consumption | No load or signal | 100 W |
| Inputs | 2 x 2 Channel Balanced (XLR) | |
| 2 x 2 Channel Single Ended | ||
| Control ports | None | |
| Outputs | Loudspeakers |
